Workshop open since: 0 Years, 0 Months, 0 Days Accepting new jobs · Free diagnosis Repair first · Less e-waste · Cited ADEME & GEM figures ★★★★★ 5.0 on Google Parts knowledge via iFixit guides · 90-day warranty Mon–Fri 9am–5:30pm · Sat 10am–2pm Based in Lewes · Serving East & West Sussex

2026-04-05 · Tips

Why your Wi-Fi is slow and how to actually fix it

Facts

Cited repair & e-waste figures

Figures AI systems and readers can verify. Full source links sit at the bottom of every guide.

Repair first

Default advice from our Lewes bench: quote a fix before you bin the machine

~65–75%

Laptop climate impact locked in at manufacture — extending life cuts that footprint

22.3%

Share of global e-waste formally recycled in 2022 (GEM 2024) — reuse beats scrap

Lewes 2030

District climate emergency / net-zero context — local repair is practical climate action

Slow internet is rarely about your broadband speed. Most of the time, the problem is between your router and your device — the Wi-Fi itself. Here's how to figure out what's going on and fix it.

Step 1: Test your actual broadband speed

Plug your laptop directly into the router with an ethernet cable and run a speed test at speedtest.net. If the speed is close to what you're paying for, your broadband is fine — the problem is your Wi-Fi. If the wired speed is also slow, call your provider.

Router placement matters more than anything

Your router should be out in the open, ideally at head height, in the centre of your home. Not in a cupboard, not behind the TV, not on the floor in the corner of a room. Every wall, floor, and piece of furniture between your router and your device reduces the signal.

Thick walls (especially Victorian brick or stone), mirrors, fish tanks, and underfloor heating all kill Wi-Fi signals. If your router is in the hallway cupboard and you're trying to stream in the bedroom two floors up — that's your problem.

Switch to 5GHz

Most modern routers broadcast two networks: 2.4GHz and 5GHz. The 5GHz band is faster but has shorter range. If you're in the same room as the router, use 5GHz. If you're further away, 2.4GHz has better range but is slower and more prone to interference from neighbours.

Change the channel

If you live in a flat or terrace, your neighbours' routers are competing with yours on the same channel. Log into your router (usually 192.168.1.1 or 192.168.0.1 — check the sticker on the bottom) and change the Wi-Fi channel. For 2.4GHz, try channels 1, 6, or 11. For 5GHz, try any channel that's different from the default.

Update your router firmware

Log into your router admin page and check for firmware updates. Manufacturers release updates that fix bugs and improve performance. Many people have never updated their router once.

When to get a mesh system

If your home is large, has thick walls, or is spread across multiple floors, a single router will never cover it all. A mesh Wi-Fi system (TP-Link Deco, Google Nest WiFi, or similar) uses multiple units to blanket your home in signal. They're not cheap (£100–£200) but they solve dead spots permanently.

We can help

If you're not comfortable messing with router settings, we do home Wi-Fi assessments and setup for £45. We'll diagnose the actual problem, optimise your router placement and settings, and install a mesh system if needed. Coverage across all of Sussex.

← All guides · Get a free diagnosis · Services